Portfolio

Scope of Works

• Temporary repair damaged gate.
• Replace bent palisade pales.

Comments

Preston fencing was contacted on a Saturday morning for an emergency gate repairon a palisade gate. As the site's used as a compound, security is paramount.

The temporary repair consisted of castiron grating mounted on a wooden back, bolted through the gate. This temporary repair did not lookhighly attractive, but did prvent access througn the damaged section and by climbing over.

The repair was completed on the monday morning. The gate is now good as new.

Project Time

This project was completed by dinner time Monday.

Client: Pindar plc.

Scope of Works

• Removal of existing chainlink fence.
• Installation of 30m Nylofor Fence system.
• Fence height at 2.3m and powder coated green.

The Nylofor M3 fencing system was developed for high security componds. The anti-climb mesh and anti-tamper fixings, ensure that sections of the fence cannot be removed.

This fence was installed by our professional industrial fencing team. Posts secured by vibrated concrete, for a harder padstone.

This project was completed within 2 days.

Scope of Works

• Installation of 300m vertical board acoustic barrier fence.
• Leveling and macadam of rose garden pathways.
• Re-establishment and grading of banking area.
• Temporary fence off project area.

Comments

This major project was subject to: the removal of 100 tonnes of excavated top soil, closure of Tom Benson Way in Preston for Two Days. The tarmacing of several pathways through the new rose garden was an additional element to this project.

Project Time

This project took two weeks to complete.

Scope of Works

• Installation of a palisade fenced compound to the side of the shop.
• Included 1 mtr wide gate.
• Installed to 6ft high.

Comments

This was a simple project to install 11 metres of palisade fencing.

The palisade fence was bolted to the wall at the rear of the compound. Posts were inserted to support the corners and mid sections.

The gate was made on site and hung from wall mounted brackets. The gate locked with a secure hasp and padlock

Project Time

This project was completed in two days.